![its plc to micrologix 1400 driver its plc to micrologix 1400 driver](https://5.imimg.com/data5/YA/IR/EY/SELLER-2370381/micrologix-1400-programmable-logic-controller-systems-500x500.jpg)
Visual inspection of components which may be damaged.Įnsure terminal blocks are screwed in and terminating adequately.ĮtherNet port will have a green light illuminated when connected to the network and an orange flickering light when communicating to the network. LCD can malfunction but the processor will still be functional. NOTE : Ensure that your program is saved or backed up before ever removing power from a processor. The LCD will display I/O status as well as change processor modes and much more. The 1766-元2BWA is powered by 120-240v AC at 50-60 Hz. This device can be communicated with through either the 9 or 8 pin RS-232 cable as well as via EtherNet. This Micro-Logix processor is capable of controlling 20 inputs and 12 outputs with a built-in 24v DC power supply. It also has 20 KB of memory for user programs and data. It has up to 6 embedded 100 kHz high-speed counters (only for DC controllers).
![its plc to micrologix 1400 driver its plc to micrologix 1400 driver](https://www.automationdirect.com/microsites/c-more/software-help/Content/DF1Half1.gif)
#Its plc to micrologix 1400 driver serial#
It has 2 Serial ports with DH485/DF1/Modbus RTU/DNP3/ASCII protocol support. The Ethernet port provides DNP3 protocol support as well as a web server and email capabilities. The 1766-元2BWA controller has various enhanced features that its predecessors lack. It is suitable for use in a clean, dry industrial environment with circuits not exceeding Over Voltage Category II. For installation, it has Panel or DIN-Rail mounting options with an open enclosure.
#Its plc to micrologix 1400 driver software#
It is programmed with RSLogix 500/Micro programming software (Version 8.1 and above). It also has an embedded real-time clock to provide a reference for applications that need time-based control. It has dimensions of 3.5 x 7.08 x 3.43 inches and a weight of 2 pounds.įor communication, the 1766-元2BWA has an isolated RS-232/485 port, an Ethernet port, and a non-isolated RS-232 port. It can be expanded with up to Seven (7) 1762 expansion I/O modules. It supports 32 digital I/O points that consist of Twelve (12) digital fast 24 Volts DC inputs, Eight (8) digital normal 24 Volt DC inputs, and Twelve (12) relay outputs. The 1766-元2BWA controller requires 120 to 240 VAC input power and has battery-backed RAM. It also features a backlight on the LCD for setting network configuration, viewing the controller and I/O status, monitoring, and manipulation. It combines the features of previous MicroLogix 1100 controllers, such as EtherNet/IP, online editing capabilities, and an LCD with enhanced features. The Allen-Bradley 1766-元2BWA is a part of the MicroLogix 1400 Programmable Logic Controller series. This software supports ladder language which is IEC61131-3 standard compliant. This controller in configured using RSLogix 500 or RSLogix 500 Micro Programming software. Most common application is the reading of barcode data of a specific product. ASCII protocol is typically used in factory automation especially in the manufacturing area. Ethernet protocol is the most modern and user-friendly protocol for communicating with multiple devices in linear topology. DNP3 is typically used in substation automation for communicating with Intelligent Electronic Devices (IEDs). This is an ideal solution for integrating Power Meters and other MODBUS devices. When configured as MODBUS RTU via RS485 wiring, daisy chain topology may be implemented where up to 32 devices may be connected. Supported protocols include DF1, DH485, ASCII, DNP3 Serial, DNP3 Ethernet, MODBUS RTU, MODBUS Ethernet, and ASCII protocol. These communication ports are capable of being operated individually to communicate with different partner devices. The integrated communication ports include One (1) combo isolated RS232/RS485port, One (1) RS232 communication port and One (1) Ethernet I/P port. The standard 24VDC Inputs is used for general purpose application while the Relay Outputs may be operated with different voltage categories, for energizing electrical loads with different nominal voltage actuations. The High-speed inputs support fast switching devices with rated frequency of 100 kHz. This controller has embedded Twelve (12) Fast 24V DC Inputs, Eight (8) standard 24VDC inputs and Twelve (12) Relay outputs. It is especially compatible for use in machine level automation or small processes. This controller belongs to the MicroLogix 1400 product family. The 1766-元2BWA is a discontinued Programmable Logic Controller (PLC) that is manufactured by Allen Bradley. Serial:ĝF1, ASCII, MODBUS RTU, DNP3, DH485Įthernet: Ethernet I/P, DNP3, MODBUS TCP/IP (12) Digital Fast 24V DC, (8) Digital Normal 24V DCġ20V AC: 25 A for 8 ms 240V AC: 40A for 4 ms